Life Probo Pr70 Instructions For Installation — Use And Maintenance Manual 10 Pages Upd ^new^

LIFE PROBO PR70: COMPLETE INSTRUCTION MANUAL FOR INSTALLATION, USE, AND MAINTENANCE Model: Probo PR70 Document Revision: 10 Pages (Including Cover) Language: English Update Date: [Current Month, Year] – Version 2.1

PAGE 1: IMPORTANT SAFETY PRECAUTIONS READ BEFORE INSTALLING THE LIFE PROBO PR70 Thank you for purchasing the Life Probo PR70. This 10-page manual provides comprehensive instructions for installation, daily use, and long-term maintenance. Failure to follow these guidelines may void the warranty. Warnings:

Do not plug in the PR70 until all water connections are secured. Use only the supplied power adapter (24V DC, 5A). The PR70 is rated for indoor use only (IPX4 splash-proof). Do not operate if the power cord is frayed or the casing is cracked.

In the Box:

Life Probo PR70 Main Unit Multi-stage filtration cartridge (pre-installed) Mounting bracket + screws (x4) ⅜” Quick-connect water hose (1.5m) Diverter valve (for faucet attachment) Remote control (batteries included) 10-page manual (this document)

PAGE 2: TECHNICAL SPECIFICATIONS | Parameter | Value | |-----------|-------| | Model | Life Probo PR70 | | Power | 120W (Standby: 2W) | | Operating Pressure | 20 – 80 PSI | | Water Temperature | 5°C – 38°C (41°F – 100°F) | | Filtration Stages | 5 (Sediment, Pre-carbon, RO/UF, Mineral, Post-carbon) | | pH Range (if ionizer) | 6.5 – 10.5 (adjustable) | | Flow Rate | 2.0 L/min (at 60 PSI) | | Display | 4.3” LCD Touch | | Filter Life Indicator | Yes (remaining days) | | Dimensions (WxHxD) | 310 x 350 x 140 mm | | Weight (dry) | 3.8 kg |

PAGE 3: INSTALLATION – PART 1 (UNPACKING & PREP) Step 1: Site Selection Warnings: Do not plug in the PR70 until

Place the Life Probo PR70 on a flat, dry surface within 1.5m of a cold water line. Leave 10cm clearance on sides for ventilation. Do not install in direct sunlight or near heat sources.

Step 2: Unpacking

Cut the seal and remove the PR70 unit. Locate the filter cartridge – rotate clockwise to lock if loose. Remove the red shipping plugs from water inlet/outlet ports. Do not operate if the power cord is

Step 3: Water Supply Connection

Option A (Under-sink): Use the ⅜” quick-connect hose to attach to cold water valve. Option B (Countertop): Screw the diverter valve onto your faucet aerator. Connect included hose.