: This image converts the AP from Lightweight (WLC-managed) to Autonomous (Standalone) mode. Summary of Key File Details ap1g2 (Aironet 1600 Series) Feature Set k9w7 (Autonomous/Standalone IOS) 15.3(3)JF15 Final release before End-of-Support (EOL) step-by-step tutorial

Install a TFTP server on your PC and set a static IP address in the range of 10.0.0.2 to 10.0.0.30 .

access points. This specific image is used to convert a "Lightweight" AP (which requires a controller) into an "Autonomous" AP that can be managed individually via a web interface or CLI. Cisco Community Preparation Checklist Before starting, ensure you have the following ready: TFTP Server : Software like running on a PC connected directly to the AP via Ethernet. Console Access

Ap1g2-k9w7-tar.153-3.jf15.tar

: This image converts the AP from Lightweight (WLC-managed) to Autonomous (Standalone) mode. Summary of Key File Details ap1g2 (Aironet 1600 Series) Feature Set k9w7 (Autonomous/Standalone IOS) 15.3(3)JF15 Final release before End-of-Support (EOL) step-by-step tutorial

Install a TFTP server on your PC and set a static IP address in the range of 10.0.0.2 to 10.0.0.30 . Ap1g2-k9w7-tar.153-3.jf15.tar

access points. This specific image is used to convert a "Lightweight" AP (which requires a controller) into an "Autonomous" AP that can be managed individually via a web interface or CLI. Cisco Community Preparation Checklist Before starting, ensure you have the following ready: TFTP Server : Software like running on a PC connected directly to the AP via Ethernet. Console Access : This image converts the AP from Lightweight