Lg K41s Isp Pinout New

like EasyJtag or Medusa Pro that you are planning to use with this pinout? Hard Reset (Factory Reset)

| ISP Function | Pad Location on PCB (Rev 1.1) | Voltage Level | Color Code (Typical Wire) | |--------------|-------------------------------|---------------|---------------------------| | | Slightly right of the eMMC, pad TP610 (near a tiny 0Ω resistor). | 1.8V | White | | CMD | Below the CPU shield corner, pad TP622 (do NOT use old TP609). | 1.8V with 4.7K pull-up required | Yellow | | D0 | TP603 – clear test point southwest of eMMC. | 1.8V | Orange | | GND | Any large copper area or the battery connector negative terminal. | 0V | Black | | VCC (eMMC power) | Do not connect externally; phone’s battery or DC supply must power the board (3.7V–4.2V). | n/a | n/a | lg k41s isp pinout new

If you want the exact ISP pad labels and a boardview for your specific LG K41S motherboard revision, tell me whether you have the board's model number or upload a clear photo of the PCB around the charging port and test pads; I’ll identify pads from the image. like EasyJtag or Medusa Pro that you are