Siemens 828d Post Processor For Mastercam

High-speed drilling, tapping (CYCLE84), and rigid tapping require cycle mapping. The post should output:

Fully supports Siemens-specific cycles like CYCLES 82, 83, 84, 85, 86, and 840. siemens 828d post processor for mastercam

| Issue | Cause | Solution | | :--- | :--- | :--- | | | Missing G-code or Siemens Cycle parameters. | Check the definition of drilling cycles in the .pst file; ensure all required Siemens arguments (RTP, RFP) are passed. | | Rotary Axis Wrong Direction | Incorrect axis definition in Machine Definition. | Verify the "Axis Combination" in Mastercam matches the CYCLE800 settings on the controller. | | Feedrate Not Active | Missing G94/G95 modal command. | Ensure pstartup$ outputs the feed mode explicitly. | | **File Name Error ensure all required Siemens arguments (RTP