Driverack 260 Updater V1.61 Patched

Do NOT use v1.61 to update a DriveRack 4820 or 240 – it’s 260-only.

Power on the DriveRack 260. Go to the front panel: Utility > System > PC Comm. Set the “PC Comm” parameter to RS-232 (not MIDI). Set the baud rate to 38400 to match your PC. driverack 260 updater v1.61

If you have an older DriveRack 260 (manufactured before 2010) or you are using a generic USB-to-Serial cable, DriveRack 260 Updater v1.61 is your safest bet. Do NOT use v1

: Power cycle the DriveRack 260 while holding the PREV PG button until the screen reads "WAITING FOR FLASH DOWNLOAD". Connect : Set the “PC Comm” parameter to RS-232 (not MIDI)

Updating your firmware ensures your unit remains a high-performance tool for live sound and installations:

Yes, the same protocol used by synthesizers in the 1980s.