Simrad Rf300 Installation Manual -

Before you even read the first step of the , physically rotate the sensor’s lever arm through its full range. It should move smoothly without any grating or sticking. The spring inside the unit should return the arm to its center position when released. If the arm feels sticky or the spring is weak, return the unit immediately—this is a common failure point that installers sometimes miss.

The Simrad RF300 Rudder Feedback Unit is a medium-duty rotary sensor designed for inboard engines to provide precise rudder angle data via a two-wire frequency interface. Installation requires precise alignment on a stable platform close to the rudder, ensuring the transmitter lever is set correctly and the link matches the distance between the rudder post and attachment point. For more details, visit Simrad Yachting . INSTALLATION REV A Instruction Manual Page 72 simrad rf300 installation manual

involves precise mechanical alignment and a simple two-wire electrical connection to your autopilot computer. This unit is specifically designed for boats with inboard engines to provide high-resolution rudder position data. Mechanical Installation Before you even read the first step of

For further assistance, you can download related documentation from the Simrad Autopilot Support Page . Simrad LIVE | Autopilot - Setup , Calibration and Features If the arm feels sticky or the spring