Standard 24-pin ATX power and a 4-pin CPU power connector. 2. Front Panel Pinout Guide (The "JFP1" Header)
: The board supports DDR3-SDRAM (240-pin). Open the clips on the DIMM slots and press the memory modules down until the clips snap back into place. acer aahd3vc motherboard manual install
| Pin | Signal | Pin | Signal | |-----|---------------|-----|---------------| | 1 | HDD_LED (+) | 2 | Power_LED (+) | | 3 | HDD_LED (-) | 4 | Power_LED (-) | | 5 | Reset SW | 6 | Power SW | | 7 | Reset SW | 8 | Power SW | | 9 | Reserved/NC | | | Standard 24-pin ATX power and a 4-pin CPU power connector
Here’s a clear, step-by-step text for installing components on an motherboard. Since this motherboard is commonly found in Acer desktops (like the Aspire XC or TC series), the instructions focus on standard installation steps. Open the clips on the DIMM slots and
: Align the motherboard’s I/O shield with the case's rear cutout and lower the board onto the standoffs. Secure it with screws.