Carrier Network Service Tool V Manual High Quality 〈Desktop Limited〉

After the software is installed (do not reboot yet), connect the USB converter. Follow the prompts to install the USB Bus driver first, followed by the Port driver Communication Configuration:

Open the "Setup" menu to configure the local COM port, baud rate (typically up to 38,400), and device address. Firewall Note: Carrier Network Service Tool V Manual

To ensure stable communication with high-stakes HVAC hardware, the following specifications are required: Minimum Requirement Windows 2000, XP, Vista, 7, or 10 Processor Pentium 600 MHz with 256K cache RAM Memory (RAM) Storage 4 GB hard disk with at least 1 GB free for NST V Hardware Key USB to CCN Converter (mandatory for software to run) Installation and Setup Guide After the software is installed (do not reboot