Prices typically range from €150 to €350 depending on the part you need. Always purchase the full set (Parts 1-3) for complete offshore fabrication requirements.
Never compromise on safety or legality by hunting for a free, unverified copy. The cost of the standard is negligible compared to the cost of a brittle fracture in the North Sea. Ensure your team works from the correct – and remember, the number is 10225 , not 102251.
EN 10225-1:2019 is a European standard titled "Weldable structural steels for fixed offshore structures – Technical delivery conditions – Part 1: Plates". It defines the specific technical requirements for steel plates used in building stationary marine assets like oil and gas platforms and wind turbine foundations. iTeh Standards Core Purpose and Scope
| Condition | Sample frequency | |-----------|------------------| | Start of coil | 1 sample per 10 m | | Production run | 1 sample per 1000 kg or per coil | | End of coil | 1 sample per 20 m |
The standard categorizes steel based on yield strength and impact properties. Designations typically follow a format such as S355, S420, and S460. For example, "S355" indicates structural steel with a minimum yield strength of 355 MPa. The standard further divides these into sub-grades (G1 through G10) based on the specific deoxidation practices and heat treatment involved.